The Graco Edge II Plus spray gun comes standard with the HVLP ProContractor models FinishPro HVLP 7.0 and FinishPro HVLP 9.5
The closed air-tight system and the extremely flexible hose whip allows you to movely the gun freely and efficiently. Spray gun settings allow you to customize the spray fan pattern by choosing the ratio of air to material and modifying the spray fan itself. You can choose to spray a narrow or wide fan, with either a longer- or rounded finish.
Graco Edge II Plus gun features
Two settings for adjusting air/material flow
Greater customization with two dials: one for air pressure and one for material volume.
FlexLiner Bag System
A closed system ensuring the cup holding the material is kept airtight. This allows the spray gun to be used upside-down if required.
Quick Release Needle
A pin situated at the top of the trigger releases the needle
Adjustable Air Cap
1. horizontal (protruding nozzle tips on the left and right of the spray pattern) for a vertical fan
2. vertical (protruding nozzle tips at the top and bottom of the spray pattern) for a horizotal fan
3. diagonal for a rounded fan
Adjustable fan width
Found at the nozzle of the gun, loosening or tightening the front cap narrows or widens the spray fan.
Adjusting air or material flow
There are two dials at the back of the gun for adjusting air pressure and material flow. They are both clearly marked “AIR” and “FLUID” so there shouldn’t be any confusion.
Needle Nozzle Kit
You will receive at least one needle #3 when you purchase this gun separately. If you get this gun with the HVLP sprayer, you will get at least two needles #3 and #4 or all three (HVLP 9.5 ProContractor model).
IMPORTANT TIP: Before removing the spray tip, hold the trigger (keep the trigger pressed) – this pulls the needle back, so that it doesn’t rub against the spray tip – causing damage to the needle.
Love our content? You can find more here:
Questions or queries?
For any further questions or if you would like to get your hands on one of these products seen in this article, you can contact us on +49 (0) 30 220 15436, fill out our contact form or email us. If you wish to purchase one of the products mentioned above, you can check them out in our online store. You can also visit us at our service base during office hours.