Which Airless Sprayers Are Used to Spray BAGAR Airliss?

If you are using a paint sprayer to apply plaster during your painting- and decorating work, you probably do not want to go back over the work you just did with a spatula. The BAGAR Airliss offers an alternative solution to make the plastering process easier and faster. Plaster coatings, however, are the heaviest materials that an airless machine can handle and so it’s important your airless pump has sufficient power to handle the greater viscosity substances. This means that not all airless sprayers are suitable for this type of work and it would be wise to check the delivery rate of your machine. Today we will focus on a practical case as many of you are using BAGAR Airliss brand products for your coating sprays.

For our native French speakers, you can read the same article in French here.

bagar-airliss g

bagar-airliss g

What are the characteristics of the BAGAR Airliss product range?

The BAGAR® range, including BAGAR Airliss, is a range of complete plastering solutions. Its main feature is that it can be used with airless spray painting equipment and benefits from the expertise and know-how of the manufacturers in this area. It is therefore prized by professional painters who can work with these materials using their airless sprayer.

Currently the following 5 plasters make up the BAGAR Airliss range:

BAGAR Airliss J: Smoothing and treatment plaster of water-jet paste strips, for interior use. Recommended airless nozzles from 0.033; 30 ° – 60 °.

BAGAR Airliss SG: Plaster compound in spray paste, in aqueous phase for indoor use. Recommended airless nozzles from 0.035; 50 ° – 60 °.

BAGAR Airliss G: Plaster for finishing and finishing in aqueous phase spray paste for indoor use. Recommended airless nozzles from 0.031 – 0.035; 50 ° – 60 °.

BAGAR Airliss C: Smoothing plaster in aqueous phase for indoor use. Recommended airless nozzles from 0.027 – 0.031; 50 ° – 60 °.

BAGAR Airliss F: Finishing plaster in aqueous phase for indoor use. Recommended airless nozzles from 0.023 – 0.027; 50 ° – 60 °.

Which airless sprayers are suitable for spray BAGAR Airliss plaster?

Here are 2 examples of airless pumps that are perfect for this type of job. Spray BAGAR Airliss with the:

Wagner ProSpray 3.39

Wagner ProSpray 3.39

Wagner ProSpray 3.39

Specifications:

engine power: 1.65 kW

voltage: 230 V / 50 Hz

maximum flow rate: 5.0 l / min

maximum nozzle size: 0.039 inches

weight: 44.0 kg

Accessories:

  • Wagner Airless spray gun
  • high-pressure hose (15 m)

The price of the Wagner ProSpray 3.39 € 4159.66 excl. VAT on Airless Discounter

Graco Mark VII

Graco Mark VII

Graco Mark VII

Specifications:

max. 6.0 l / min

maximum operating pressure: 230 bar

maximum size of the nozzle: 0.041 inches / 1.04 mm (541)

Accessories:

hose (15m)

Whip-hose (0,9m) and

Graco spray gun with tip

The price of the Graco Mark VII is 4999,99 € excl. VAT on Airless Discounter

These 2 sprayer models Airless Discounter recommends first. Subject to confirmation from the plaster manufacturer, other models of airless sprayers may also be suitable for spray Bagar Airliss plaster. Find all our other offers of new and used airless pumps for plaster on our online store.

Information about the manufacturer Beissier

Beissier was founded in the early 14th century in Paris and initially made gelatin. Today they design, manufacture and sell numerous plaster- and paint solutions for media preparation. Beissier is now a leader in paints for painters in Europe.

All BAGAR Airliss coatings and their data sheets are available on the website of the manufacturer Beissier.

For any further questions regarding BAGAR Airliss, you can contact us on +49 (0) 30 220 15436, fill out our contact form below or email us. If you wish to purchase one of the products mentioned above, you can check them out in our online store. You can also visit us at our service base during office hours.

 

By |2018-06-05T10:01:27+00:00June 5th, 2018|Airless Paint Sprayers|0 Comments

Leave A Comment